IBM 88772ru User Guide - Page 82
Cabling, Remote, Supervisor, Adapter, SlimLine, Installing, firmware
UPC - 000435948922
View all IBM 88772ru manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Cabling the Remote Supervisor Adapter II SlimLine You can manage the server remotely through the Remote Supervisor Adapter II SlimLine by using the dedicated systems-management Ethernet connector on the rear of the server. For additional information about network configuration, see the Remote Supervisor Adapter II Installation Guide. To cable the Remote Supervisor Adapter II SlimLine, complete the following steps: 1. Connect one end of a Category 3 or Category 5 Ethernet cable to the dedicated systems-management Ethernet connector. See "Server controls, connectors, LEDs, and power" on page 8 for the location of the systems-management Ethernet connector. 2. Connect the other end of the cable to the network. Installing the Remote Supervisor Adapter II SlimLine firmware The software and firmware files that you need are contained in one system service package installation kit. The kit contains the following files: v Software and firmware installation instructions v BIOS code update with support for the Remote Supervisor Adapter II SlimLine v Diagnostics code update v Remote Supervisor Adapter II SlimLine device drivers v Remote Supervisor Adapter II SlimLine firmware update v Integrated service processor firmware update v Video device driver v Firmware-update utility program To download and install the software and firmware, complete the following steps. Note: changes are made periodically to the IBM Web site. The actual procedure might vary slightly from what is described in this document. 1. Go to http://www.ibm.com/servers/eserver/support/xseries/index.html. 2. From the Hardware list, select System x3755 and click Go. 3. Click the Download tab. 4. Select the system service package for the operating system that is running on the server in which the Remote Supervisor Adapter II SlimLine is installed. 5. Click the file link to download the system service package to d:\ibmssp, where d is the hard disk drive letter. (Create the directory if necessary.) 6. Extract the files into d:\ibmssp. See the readme.txt file, which is included with the extracted files, for a list of the files in the package. 7. Follow the instructions in Remote Supervisor Adapter II Installation Instructions, which is in Portable Document Format (PDF) in d:\ibmssp, to install the software and firmware. 8. Restart the server after the software and firmware are installed. 70 IBM System x3755 Type 8877: User's Guide