Icom IC-M802 Instruction Manual - Page 10
Panel Description
![]() |
View all Icom IC-M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 PANEL DESCRIPTION I Front panel- Controller Function display (pgs. 6, 7) !7 !6 !5 !4 q DISTRESS !3 w e r !2 t y q DISTRESS SWITCH [DISTRESS] (p. 18) Push for 5 sec. (approx.) to make a distress call. w DSC SWITCH [DSC] Switches DSC watch mode and voice/e-mail communication mode when pushed. e CANCEL/CALL SWITCH [CANCEL/CALL] ➥ Cancels a distress or DSC repeat call. (p. 20) ➥ Push for 1 sec. to start calling after DSC contents are setup. r HEADPHONE JACK [ ] Accepts headphones. • Output power: 5 mW with a 16 Ω load (stereo). t MICROPHONE CONNECTOR [MIC] Accepts the supplied or optional microphone. • See p. 66 for appropriate microphones. • See p. 61 for microphone connector information. y GROUP SELECTOR [GRP] ➥ Selects groups in 20 channel steps and ITU marine channel groups. (p. 8) ➥ Selects items during quick/initial set mode, etc. u CHANNEL SELECTOR [CH] ➥ Selects an operating channel within the selected channel group such as ITU channels. (p. 8) • User channels can be selected from 1 to 160 (max.) in sequence regardless of the channel group. ➥Changes setting or value of the selected item during quick/initial set mode, etc. u i o !0 !1 i RX/CLARITY SWITCH [RX CLAR] ➥ After pushing [F], turns the clarity function ON and OFF. (p. 12) • [CH] is used for clarity control. ➥ During DSC watch mode, enters RX memory select screen. (p. 38) • [CH] is used for distress and other call selection. o POWER SWITCH [POWER] ➥ Push to turn the power ON. ➥ Push for 1 sec. to turn the power OFF. !0 TX/TRANSMIT FREQUENCY SWITCH [TX TXF] ➥ After pushing [F], displays the transmit frequency, and opens the squelch. Checks and monitors the transmit frequency while holding. (p. 10) ➥ During DSC watch mode, enters TX memory select screen. (p. 43) • [CH] is used for memory selection. !1 VOLUME CONTROL [VOL] Adjusts the audio output level. • Audio does not come from the speaker when: - The speaker switch is turned ON. - The squelch function is turned ON and no signal is being received. - During DSC watch mode. 2
![](/manual_guide/products/icom-icm802-instruction-manual-5480756/10.png)