Icom IC-M802 Instruction Manual - Page 58

12 SET MODE D Initial set mode items (continued) Scan type This item selects one of the following scan functions. Programmed scan searches signals within the frequency range and activates slowly while squelch is open and fast while squelch is closed. Channel scan and channel resume scan searches 20 channels around a user selected channel, or searches all ITU channels in the band when an ITU channel is selected. (default: CH SCAN) Scan speed This item adjusts the scan speed (rate at which chan- nels are searched). The scan speed can be set from 1 to 10 with "1" being the fastest and "10" being the slowest. (default: 4) Display type The upper half of the display can be set to display a programmable channel name or a receive frequency according to your needs. (default: CH-NAME) J2B filter Select the IF filter passband width for J2B mode operation from wide, mid and narrow. • WIDE : 2.4 kHz • MIDDLE : 1.0 kHz • NARROW : 500 Hz (default) F1B filter Select the IF filter passband width for F1B mode operation from normal and narrow. • WIDE : 1.0 kHz • NARROW : 500 Hz (default) FSK tone frequency Several mark frequencies are used for FSK operation. This item selects an FSK mark frequency for almost any FSK system from 1200 Hz, 1275 Hz, 1487.5 Hz, 1615 Hz, 2100 Hz and 2125 Hz. (default: 1615Hz) 50 *** SET MODE *** ÇÇ C H S C A N CH-RESUME SCAN PROGRAM SCAN ITEM SEL *** SET MODE *** ITEM SEL *** SET MODE *** CH-FREQUENCY ÇÇ C H - N A M E ITEM SEL *** SET MODE *** WIDE MIDDLE ÇÇ N A R R O W ITEM SEL *** SET MODE *** WIDE ÇÇ N A R R O W ITEM SEL *** SET MODE *** 1275Hz 1487.5Hz ÇÇ 1 6 1 5 H z 2100Hz ITEM SEL