Icom IC-M802 Instruction Manual - Page 17
Using scan function
![]() |
View all Icom IC-M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3 SELECTING A CHANNEL/FREQUENCY D Using the keypad Direct channel selection via the keypad is available for quick channel selection. q Enter the desired channel number via the keypad. • Pushing [CE] clears input digits and retrieves the channel. •A user channel is selected when channel 1-160 is input (max. number may be optionally restricted). • An ITU SSB channel is selected when channel numbers higher than 401 are input. • When selecting an ITU simplex channel, push [0 DIM] three times to input "- (dash)." (e.g. When selecting the channel 4-1; - push [4 SP×], [0 DIM], [0 DIM], [0 DIM] then [1 NB].) w Push [ENT] to select the channel. [EXAMPLE]: Selecting channel 158 RX J3E RX L RX L RX L CH ---GPS--- J3E Lat 45 Lon134 59'N 44'E H 16:23 CH ---GPS--- J3E Lat 45 Lon134 59'N 44'E H 16:23 CH ---GPS--- J3E L L Sao Itn M1 P43 5 4 59'N 44'E H 16:23 CH ---GPS--Lat 45 59'N 3 D Using scan function The transceiver has automatic channel or frequency change capability (scan function). There are 3 types of scan functions available to suit your needs. Channel scan/Channel resume scan Ch 1 Ch 2 Ch 3 Ch 20 Ch 4 When resume OFF; scan does not pause even if a signal is received. When resume ON; scan pauses for 10 sec., then resumes, or resumes after 2 sec. from when the signal disappears. Programmed scan Ch 159 Ch 160 Scans the frequency range between the programmed frequencies on channels 159 and 160. Scans fast when squelch is closed and slowly when squelch is open. Channel scan and channel resume scan increase channels within a 20 channel range, such as Ch 1 to Ch 20, Ch 141 to Ch 160, etc., in user channels; or all channels in the group of ITU channels. Programmed scan scans frequencies within the frequency range between user channels 159 and 160. Scan type selection is available in initial set mode. See p. 50 for the selection. SCAN OPERATION q Rotate [GRP] and [CH], or use the keypad to se- lect your desired channel group. • This operation is not necessary for programmed scan. w Push [F] then [2 SQL] to turn OFF the squelch function, if programmed scan is selected. e Push [F] then [3 SCAN] to start the scan. r To stop the scan, repeat step e again. •[CH] rotation or pushing some other switches also stops the scan. 9
![](/manual_guide/products/icom-icm802-instruction-manual-5480756/17.png)