Icom IC-M802 Instruction Manual - Page 56
Set Mode
View all Icom IC-M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
12 SET MODE I Quick set mode D Entering quick set mode q Push [F] then [MODE SET] to enter quick set mode. • Select voice or e-mail operation mode in advance. w Rotate [GRP] to select the desired item. e Rotate [CH] to set the values or conditions for the selected item. r Push any key to exit quick set mode. D Quick set mode items Noise blanker level This item adjusts the noise blanker level to protect a signal from various pulse-type noises from 1 to 10. (default: 5) The set level is effective when the noise blanker is activated. Squelch level This item adjusts the squelch threshold level from 1 to 100. (default: 30) When the squelch is activated, signals stronger than this set level only are received. Dimmer This item sets the LCD backlight brightness for dimmer selection from 0 (dark) to 10 (bright). By pushing [F] then [0 DIM], the set brightness is se- lected to provide easy visibility during night time op- eration, etc. (default: 6) LCD contrast This item sets the LCD contrast from 1 to 10. (default: 7) Filter selection ✔ This item appears when e-mail mode is selected before entering quick set mode. Selects the IF filter passband width for independent e-mail channel operation from WIDE (2.8 kHz; default), MIDDLE (2.4 kHz) and NARROW (500 Hz). 48 [F] [MODE SET] [GRP] [CH] ITEM SEL ITEM SEL ITEM SEL ITEM SEL ÇÇ W I D E MIDDLE NARROW ITEM SEL