Icom IC-M802 Instruction Manual - Page 47
Distress call, Distress relay call
View all Icom IC-M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
8 WHEN RECEIVING A CALL I Distress call q When receiving a distress call, an emergency alarm sounds and the display below appears. * Distress * * 123456789 * Exit Traffic w Push [CANCEL/CALL] to stop the alarm, if desired. • One distress call sequence is sent 5 times repeatedly within approx. 30 sec. The emergency alarm sounds at each reception. e Push [ENT] to set the transceiver to the distress phone frequency, then monitor the communication from the coast station to the ship in distress. RX < Traffic > J3E GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit r Select the received distress call memory channel to check the position of the ship in distress. ➥ Push [FREQ/CH] then [RX CLAR] to select "RX memory" screen. ➥Select "Distress" with [CH] then push [ENT]. ➥ Push [ENT] again. •The received distress call memory is displayed at the top line with "*" symbol. • When the ship is close to you, communication should be monitored continuously. • The traffic frequency is monitored even when the mem- ory contents is displayed. ****** RX memory ******* ------- Distress ------- Distress ID:123456789 Undesignated Position:Lat 34 34'N Lon134 34'W UTC 12:34 Traffic:J3E TX 2182.0kHz RX 2182.0kHz RX Freq:TX 2187.5kHz RX 2187.5kHz DEL Cancel OK I Distress relay call q When receiving a distress relay call, an emergency r Select the received distress call memory channel alarm sounds and the display below appears. to check the position of the ship in distress. ➥ Push [FREQ/CH] then [RX CLAR] to select "RX 8 * Distress RLY * * 001234567 * memory" screen. ➥ Select "Others" with [CH] then push [ENT]. ➥ Push [ENT] again. • The received distress relay call memory (DTRS Exit Traffic RLY) is displayed at the top line with "*" symbol. • When the ship is close to you, communication should w Push [CANCEL/CALL] to stop the alarm, if desired. e Push [ENT] to set the transceiver to the distress phone frequency, then monitor the communication from the coast station to the ship in distress. RX < Traffic > J3E GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit be monitored continuously. • The traffic frequency is monitored even when the memory contents is displayed. ****** RX memory ******* ----- Distress RLY ----- From:001234567 Distress ID:123456789 To all ships Undesignated Position:Lat 34 34'N Lon134 34'W UTC 12:34 Traffic:J3E TX 2182.0kHz RX 2182.0kHz RX Freq:TX 2187.5kHz RX 2187.5kHz DEL Cancel OK 39