Insignia NS-19LD120A13 User Manual (English) - Page 13
Connecting power, Connecting a cable or satellite box
View all Insignia NS-19LD120A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Insignia 19" LCD TV/DVD Combo Connecting power To connect the power: • Connect the AC power cord to the AC jack on the back of your TV/DVD combo, then connect the other end to a power outlet. Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see "What connection should I use?" on page 8. Using HDMI (best) To connect a cable or satellite box using HDMI: 1 Make sure that your TV/DVD combo's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to the HDMI jack on the side of your TV/DVD combo and to the HDMI OUT jack on the cable or satellite box. Cautions • Your TV/DVD combo should only be operated from the power source indicated on the label. • Always unplug the AC power cord from the power outlet when you will not be using your TV/DVD combo for an extended period of time. Cable or satellite box HDMI cable Side of TV 4 Plug your TV/DVD combo's power cord into a power outlet, turn on your TV/DVD combo, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 19. Note An HDMI cable carries both audio and video. You do not need to use any audio cables. www.insigniaproducts.com 9