Insignia NS-19LD120A13 User Manual (English) - Page 8

NS-19LD120A13 Insignia 19" LCD TV/DVD Combo Insignia 19" LCD TV/DVD Combo Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-19LD120A13 represents the state of the art in LCD TV/DVD combo design and is designed for reliable and trouble-free performance. Installing the stand or wall-mount bracket Notes • • If you plan to wall-mount your TV/DVD combo, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Secure the stand to the screen with the two provided screws. Screw type Screw length # of screws M4 18 mm 2 Installing a wall-mount bracket Warning This TV/DVD combo is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See "Miscellaneous" on page 46.) To attach your TV/DVD combo to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If the stand is attached, remove the two screws that secure the stand to the TV screen, then remove the stand. 3 Attach the wall-mount bracket to your TV/DVD combo using the mounting holes on the back of your TV/DVD combo. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV/DVD combo. Note • • The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. The mounting holes on the back of your TV/DVD combo take type M4 screws. 3.94 in. (100 mm) 3.94 in. (100 mm) Wall-mount brackets 4 www.insigniaproducts.com