Insignia NS-19LD120A13 User Manual (English) - Page 15

Insignia 19" LCD TV/DVD Combo Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV/DVD combo's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an A/V cable (not provided) to the VIDEO IN/AV jack and L and R audio jacks on the side of your TV/DVD combo and to the composite video and audio out jacks on the cable or satellite box. Note • The VIDEO IN/AV jack shares the audio jacks with the COMPONENT IN video jacks. • When you connect the audio using the L and R audio jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Cable or satellite box Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV/DVD combo's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV/DVD combo and to the coaxial out jack on the cable or satellite box. Cable or satellite box A/V cable Coaxial cable Side of TV 4 Plug your TV/DVD combo's power cord into a power outlet, turn on your TV/DVD combo, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 19. Side of TV 4 Plug your TV/DVD combo's power cord into a power outlet, turn on your TV/DVD combo, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 19. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 11