Intel D101GGC Product Specification - Page 45

Jumper Block

Get Intel D101GGC PDF manuals and user guides View all Intel D101GGC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Technical Reference 2.8 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 10 shows the location of the jumper block. The jumper block determines the BIOS Setup program's mode. Table 28 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. 1 3 OM19011 Figure 10. Location of the Jumper Block Table 28. BIOS Setup Configuration Jumper Settings Function/Mode Normal Configure Jumper Setting 1-2 1 3 2-3 1 3 Configuration The BIOS uses current configuration information and passwords for booting. After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 1 3 The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Technical Reference
45
2.8 Jumper Block
CAUTION
Do not move the jumper with the power on.
Always turn off the power and unplug the power cord
from the computer before changing a jumper setting.
Otherwise, the board could be damaged.
Figure 10 shows the location of the jumper block.
The jumper block determines the BIOS Setup
program’s mode.
Table 28 describes the jumper settings for the three modes:
normal, configure, and
recovery.
When the jumper is set to configure mode and the computer is powered-up, the BIOS
compares the processor version and the microcode version in the BIOS and reports if the two match.
OM19011
1
3
Figure 10.
Location of the Jumper Block
Table 28.
BIOS Setup Configuration Jumper Settings
Function/Mode
Jumper Setting
Configuration
Normal
1-2
1
3
The BIOS uses current configuration information and
passwords for booting.
Configure
2-3
1
3
After the POST runs, Setup runs automatically.
The
maintenance menu is displayed.
Recovery
None
1
3
The BIOS attempts to recover the BIOS configuration.
A
recovery diskette is required.