Intel D101GGC Product Specification - Page 69
Error Messages and Beep Codes
View all Intel D101GGC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4 Error Messages and Beep Codes What This Chapter Contains 4.1 Speaker ...69 4.2 BIOS Beep Code...69 4.3 BIOS Error Messages 69 4.4 Port 80h POST Codes 70 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. For information about The location of the onboard speaker Refer to Figure 2, page 12 4.2 BIOS Beep Code If a memory error occurs during POST, three long beeps will sound. 4.3 BIOS Error Messages Table 41 lists the error messages and provides a brief description of each. Table 41. BIOS Error Messages Error Message CMOS Battery Low CMOS Checksum error - defaults loaded Disk Boot Failure, Insert System Disk and Press Enter Explanation The battery may be losing power. Replace the battery soon. The CMOS checksum is incorrect. CMOS memory may have been corrupted. Run Setup to reset values. System did not find a device to boot. 69