Intel D848PMB Technical Product Specification - Page 20
Processor
View all Intel D848PMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Intel Desktop Board D848PMB Technical Product Specification 1.5 Processor ✏ NOTE Refer to Thermal Considerations (Section 2.12, page 69) for important information when using an Intel Pentium 4 processor operating above 2.80 GHz with this Intel desktop board. The board is designed to support the following: • Intel Pentium 4 processors in an mPGA478 processor socket with a 400/533/800 MHz system bus • Intel Celeron processors in an mPGA478 processor socket with a 400 MHz system bus See the Intel web site listed below for the most up-to-date list of supported processors. For information about Supported processors for the D848PMB board Refer to http://www.intel.com/design/motherbd/mb/mb_proc .htm CAUTION Use only the processors listed on web site above. Use of unsupported processors can damage the board, the processor, and the power supply. # INTEGRATOR'S NOTES • Use only ATX12V-, SFX12V-, or TFX12V-compliant power supplies with the Desktop Board D848PMB. ATX12V, SFX12V, and TFX12V power supplies have an additional power lead that provides required supplemental power for the processor. Always connect the 20-pin and 4-pin leads of ATX12V, SFX12V, and TFX12V power supplies to the corresponding connectors on the desktop board, otherwise the board will not boot. • Do not use a standard ATX power supply. The board will not boot with a standard ATX power supply. • Refer to Table 4 on page 21 for a list of supported system bus frequency and memory speed combinations. For information about Power supply connectors Refer to Section 2.8.2.3, page 55 20