Intel S3420GPLC Product Specification - Page 75
System Acoustic and Performance Configuration, Advanced, System Acoustic and, Performance
UPC - 735858211819
View all Intel S3420GPLC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Intel® Server Board S3420GP TPS BIOS User Interface Setup Item Onboard NIC iSCSI ROM NIC 1 MAC Address NIC 2 MAC Address Options Enabled Disabled No entry allowed No entry allowed Help Text If enabled. loads the embedded option ROM for the onboard network controllers. Warning: If [Disabled] is selected, NIC1 and NIC2 cannot be used to boot or wake the system. Comments This option is grayed out and not accessible if either the NIC1 or NIC2 ROMs are enabled. Note: This option is not available on some models. Information only. 12 hex digits of the MAC address. Information only. 12 hex digits of the MAC address. 6.3.2.2.7 System Acoustic and Performance Configuration The System Acoustic and Performance Configuration screen allows the user to configure the thermal characteristics of the system. To access this screen from the Main screen, select Advanced > System Acoustic and Performance Configuration. Advanced System Acoustic and Performance Configuration Set Throttling Mode Altitude Set Fan Profile Auto/CLTT/OLTT 300m or less/301m-900m/901m - 1500m/Higher than 1500m Performance, Acoustic Figure 27. Setup Utility - System Acoustic and Performance Configuration Screen Display Table 26. Setup Utility - System Acoustic and Performance Configuration Screen Fields Setup Item Set Throttling Mode Options Auto CLTT OLTT Help Text [Auto] - Auto Throttling mode. [CLTT] - Closed Loop Thermal Throttling Mode. [OLTT] - Open Loop Thermal Throttling Mode. Comments Note: The OLTT option is shown for informational purposes only. If the user selects OLTT, the BIOS overrides that selection if the system can support CLTT. OLTT is configured only when UDIMMs without Thermal Sensors are installed. Revision 2.4 63 Intel order number E65697-010