Intel S3420GPLC Product Specification - Page 78

BIOS User Interface Intel® Server Board S3420GP TPS  Main Advance d Security Server Management Boot Options Boot Manager  Assert NMI on SERR Assert NMI on PERR Resume on AC Power Loss Clear System Event Log Enabled/Disabled Enabled/Disabled Stay Off/Last state/Reset Enabled/Disabled FRB-2 Enable Enabled/Disabled O/S Boot Watchdog Timer O/S Boot Watchdog Timer Policy O/S Boot Watchdog Timer Timeout ACPI 1.0 Support Plug & Play BMC Detection Enabled/Disabled Power off/Reset 5 minutes/10 minutes/15 minutes/20 minutes Enabled/Disabled Enabled/Disabled ► Console Redirection ► System Information Figure 29. Setup Utility - Server Management Configuraiton Screen Display Table 28. Setup Utility - Server Management Configuration Screen Fields Setup Item Assert NMI on SERR Options Enabled Disabled Assert NMI on PERR Enabled Disabled Resume on AC Power Loss Stay Off Last state Reset Clear System Event Log FRB-2 Enable Enabled Disabled Enabled Disabled Help Text On SERR, generate an NMI and log an error. Note: [Enabled] must be selected for the Assert NMI on PERR setup option to be visible. On PERR, generate an NMI and log an error. Note: This option is only active if the Assert NMI on SERR option is [Enabled] selected. System action to take on AC power loss recovery. [Stay Off] - System stays off. [Last State] - System returns to the same state before the AC power loss. [Reset] - System powers on. If enabled, clears the System Event Log. All current entries will be lost. Note: This option is reset to [Disabled] after a reboot. Fault Resilient Boot (FRB). If enabled, the BIOS programs the BMC watchdog timer for approximately 6 minutes. If the BIOS does not complete POST before the timer expires, the BMC resets the system. Comments 66 Revision 2.4 Intel order number E65697-010