Intermec CK3R CK3R and CK3X Mobile Computer User Manual - Page 60

Chapter 3 - Configure the Computer Configure the Computer Remotely with SmartSystems You can use Intermec Settings from a SmartSystems console to remotely configure all the Intermec computers. For help using Intermec Settings, click Help > Contents. For information on all the parameters in Intermec Settings, see the Intermec Settings Command Reference Manual. 1 In the SmartSystems console, select a computer and then right-click on it. A list appears. 2 Select Start Intermec Settings. 3 Configure the settings you want to change. As you select parameters, help for each parameter appears in the upper right pane. 4 When you are done making changes, select File > Save Settings. About Network Communications You can use the mobile computer in your wireless or wired data collection network. You can connect your computer using: • 802.11 radio communications. • Ethernet communications. • Bluetooth communications. • USB and serial communications. Configure 802.11 Radio Communications Caution: Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage. The CK3R has an 802.11b/g/n radio and the CK3X has an 801.11a/b/g/n radio to transfer data using wireless communications. Before you configure radio communications, you need to have your wireless network set up including your access points. 48 CK3R and CK3X Mobile Comptuer User Manual