Intermec CK3R CK3R and CK3X Mobile Computer User Manual - Page 76
Con x Security with Microsoft Security
View all Intermec CK3R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 3 - Configure the Computer 3 Enter the Network name (SSID). 4 For Infrastructure Mode, select Infrastructure. 5 For Association, select WPA-PSK or WPA2-PSK. The default encryption is TKIP or AES, respectively. 6 For Pre-Shared Key, enter the pre-shared key or passphrase: • Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for your access point. • Enter the passphrase (8 to 63 ASCII characters) for your authenticator. The computer internally converts the passphrase to a pre-shared key. 7 Tap OK. Configure 802.1x Security with Microsoft Security Before you set 802.1x-WEP security with Microsoft security, you need to enable the radio on your computer and set the date. To use TLS protocol, you also need to load a user and root certificate. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Start Intermec Settings. 2 Select Communications > 802.11 Radio > Microsoft Security. 3 Enter the Network name (SSID). 4 For Infrastructure Mode, select Infrastructure. 5 For Network Authentication, select Open. 6 For Data Encryption, select WEP. 7 For 802.1X Authentication, select TLS or PEAP. 8 Select Hidden Network. 9 Tap OK. The User Logon dialog box appears. 10 If you selected PEAP: a Enter a User Name, Password, and Domain. b If you want to save the password for future authentication sessions, select Save Password. 64 CK3R and CK3X Mobile Comptuer User Manual