Intermec PB31 PB21 and PB31 Mobile Receipt Printer User Guide - Page 16
How to Use the PB21 and PB31 Buttons, Using the PB21 and PB31 Mobile Receipt Printer
View all Intermec PB31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 1 - Using the PB21 and PB31 Mobile Receipt Printer How to Use the PB21 and PB31 Buttons Name Feed Setup Button Function Press to advance the media. The amount of media that feeds is dependent on the type of media you are using. It will advance by 5 mm (0.2 inch), or feed a configured length of media based on your media and settings. If the printer is printing, pressing this button causes the printer to pause. Press the button again to resume printing. Press to display the Setup menu. With ESC/P firmware, press and hold to cancel printing. Standby (Power) Info Press to put the printer in Standby mode. In Standby mode, power to the radio, the display, and the backlight are turned off. Press to turn the printer back on and put in Ready mode. Press to display a summary of network connection information and error conditions. Each setting in the summary information displays on the screen for five seconds. In Fingerprint and IPL, press this button in Pause mode to cancel the print job. The Info button is unavailable in ESC/P. All of the buttons can act as "soft keys," which means that the function of each button depends on the state of the printer. A small icon appears in the screen next to the button to indicate the function it performs. 4 PB21 and PB31 Mobile Receipt Printer User Guide