Intermec PB31 PB21 and PB31 Mobile Receipt Printer User Guide - Page 42
To connect the printer to a PC through the serial port using, HyperTerminal
View all Intermec PB31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 2 - Configuring the PB21 and PB31 7 PrintSet attempts to connect to your printer. If it cannot find your printer, click Back to review the communication settings, and then try again. When PrintSet connects to your printer, click Next. 8 Click Finish. Your printer appears in the My Printers list. To connect the printer to a PC through the serial port using HyperTerminal 1 Connect the serial cable to the connector on the back of the printer and connect the other end to your PC. 2 On your PC, start the communications program. 3 If necessary, configure the port settings so they match those of your printer: Bits per second: 115200 Data bits: 8 Parity: None Stop bits: 1 Flow control: XON_XOFF 4 If you are using HyperTerminal: a Click OK. b Click the Settings tab. c Click ASCII Setup. The ASCII Setup window appears. d Select these check boxes, and then click OK: • Send line ends with line feed • Echo typed characters locally • Append line feeds to incoming line ends 30 PB21 and PB31 Mobile Receipt Printer User Guide