Intermec PB31 PB21 and PB31 Mobile Receipt Printer User Guide - Page 20
Connecting the Printer Through the Serial Port on Setup button, CMD Language., Setup
View all Intermec PB31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 - Using the PB21 and PB31 Mobile Receipt Printer To change the printer language using ESC/P and a communications program 1 Connect your printer to your PC using a serial cable. For help, see "Connecting the Printer Through the Serial Port" on page 29. 2 Start a communications program like HyperTerminal. 3 Enter U-shell. Press the ESC key and type: {SYS:USH} 4 Send the enable administrator rights command: su -p pass admin 5 Send the run command to change the printer language: setlanguage IPL -r To change the printer language using the display and Fingerprint 1 Press the Setup button. The Setup menu system appears 2 Press until you reach Print Defs. 3 Press to enter the Print Defs menu system. 4 Press until you reach CMD Language. 5 Press to enter the CMD Language menu system. 6 Press until you see the language of you want to select. 7 Press to select the language. 8 Cold boot the printer: a Remove the printer battery. b Replace the printer battery. c Turn the printer on. To change the printer language using the display and IPL 1 Press the Setup button. The Setup menu system appears. 2 Press until you reach Test/Service. 3 Press to enter the Test/Service menu system. 4 Press until you reach CMD Language. 5 Press to enter the CMD Language menu system. 6 Press until you see the language of you want to select. 8 PB21 and PB31 Mobile Receipt Printer User Guide