Intermec PB31 PB21 and PB31 Mobile Receipt Printer User Guide - Page 50
can be OFF, LEAP, or TTLS., If you are using certificates for validation, you may need to use
View all Intermec PB31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 2 - Configuring the PB21 and PB31 2 Send one of these commands to enable WPA-802.1x or WPA2802.1x authentication. You should also send the WPA_PSK command that does not contain a value: ws,WPA,ON ws,WPA2,ON ws,WPA_PSK, 3 Send these commands to configure the EAP_TYPE: ws,EAP_TYPE,xxxx where xxxx can be OFF, LEAP, PEAP, or TTLS. ws,.EAP_USER,xxxx ws,.EAP_PASS,xxxx where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the TTLS outer name: ws,TTLS_USER, xxxx where xxxx is the outer name. 5 If you are using certificates for validation, you may need to use these commands: • Send these commands to set a certificate and enable validation: ws,CA_CERT,c:/testCA.pfx@export ws,VALIDATE,ON where c:/testCA.pfx is the location and name of the certificate and export is the passphrase. • Send these commands to set a common name for server 1 and server 2: ws, .SERVER_CN1,xxxxxxxxxx ws, .SERVER_CN2,xxxxxxxxxx where xxxxxxxxxx can be a value from 0 to 64 characters. 38 PB21 and PB31 Mobile Receipt Printer User Guide