Intermec PB32 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 23
Using the Batteries
View all Intermec PB32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 - Using the PB22 and PB32 Mobile Label and Receipt Printer Using the Batteries The printer uses a rechargeable 7.4 V 2300 mAh lithium-ion battery (Model AB27) for power. You must fully charge the battery before you can use the printer. The battery retains a charge for up to five days when the printer is in Standby mode. A fully charged battery can usually print over 300 6-inch labels (PB32) or 500 6-inch labels (PB22) at 25% print density. When the printer reports low battery, it can usually print over 50 6-inch labels at 10% print density. The number of labels you can print varies depending on these factors: • Age of the battery • Temperature and humidity of the operating environment • Printer configuration, including network connection settings • Type of media loaded in the printer • Amount of data printed for each label • Threshold at which you configure the low battery warning Use Intermec Model AB27 battery only. Use of another battery may present a risk of fire or explosion. The Model AB27 battery may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F), or incinerate. Dispose of used batteries promptly. Keep away from children. PB22 and PB32 Mobile Label and Receipt Printer User Guide 11