Intermec PB32 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 26
Extending Battery Life, Battery Icon Status continued
View all Intermec PB32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 - Using the PB22 and PB32 Mobile Label and Receipt Printer Battery Icon Status (continued) Icon Status Battery charging error. You may need to replace the battery. External power connected and there is no battery in the printer. Extending Battery Life Follow these guidelines to extend the overall life of your battery: • Never expose the battery to direct sunlight or temperatures over 50 °C (122 °F). • Only charge the battery inside the printer using a power supply or in the 4-bay battery charger (Model AC18). • Do not set the backlight to always on. The always on setting disabled automatic power saving modes. Follow these guidelines to extend the life of your battery between charges: • Press the Standby button to put the printer in Standby mode. • Remove the battery if you do not need to use the printer for three days or more. • Do not operate the printer when the ambient temperature is -20 °C (-4 °F) or lower. Using the printer in temperatures below freezing reduces the overall battery life. Note: Rechargeable batteries lose their ability to maintain a charge over time. You can only recharge a battery a finite number of times before you must replace it. 14 PB22 and PB32 Mobile Label and Receipt Printer User Guide