Intermec PB32 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 93
Factory Default Settings (ESC/P Printers
View all Intermec PB32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Appendix B- Default Settings Factory Default Settings (ESC/P Printers) Factory Default Settings for ESC/P Printers Setting Auto detect printer Media dark adjust Print speed Power Low battery indicator Sleep timer Standby timer Bluetooth Discoverable Connectable Encryption Authentication Reserve printer Device name Passcode Serial-Com Baud rate Data bits Parity Stop bits Protocol Network IP selection IP address Netmask Default router Name server MAC address Default Value Enable 100 75 mm/s 7.4 V 20 sec 30 min Enable Enable Disable Disable Disable 1-16 characters 1234 115200 8 None 1 XON/XOFF DHCP and BOOTP 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Unique PB22 and PB32 Mobile Label and Receipt Printer User Guide 81
Appendix B— Default Settings
PB22 and PB32 Mobile Label and Receipt Printer User Guide
81
Factory Default Settings (ESC/P Printers)
Factory Default Settings for ESC/P Printers
Setting
Default Value
Auto detect printer
Enable
Media dark adjust
100
Print speed
75 mm/s
Power
Low battery indicator
7.4 V
Sleep timer
20 sec
Standby timer
30 min
Bluetooth
Discoverable
Enable
Connectable
Enable
Encryption
Disable
Authentication
Disable
Reserve printer
Disable
Device name
1-16 characters
Passcode
1234
Serial-Com
Baud rate
115200
Data bits
8
Parity
None
Stop bits
1
Protocol
XON/XOFF
Network
IP selection
DHCP and BOOTP
IP address
0.0.0.0
Netmask
0.0.0.0
Default router
0.0.0.0
Name server
0.0.0.0
MAC address
Unique