Jensen NVX225 User Manual - Page 83

Just pick any of the recent locations as your destination. Here you have no possibility to reorder the list or filter it by name, but the Next and Previous buttons let you browse through the complete list to find your preferred point. Tip: If you will need a location later but you do not want to save it as POI, just mark it with a pin, and remember its color to find it easily in the History list. 6.3.3 Find Coordinates The NVX225 Navigator also lets you enter your destination by map coordinates. The coordinates need to be in latitude/longitude format and, based on the WGS84 earth model (the one used by most GPS devices). When you enter this page, the coordinates of the current GPS position (or the selected map point (Cursor) if Lock-to-Position is inactive) are shown at the top of the display. The coordinates are always shown in the format configured in advanced settings Display options (5.6.1.4), but you can enter the coordinates in any of the three formats. You can even enter the latitude and longitude in different formats. Entering a latitude/longitude pair is easy. The left field contains the latitude. It starts with andN' (North) or 'S' (South) letter. This tells The NVX225 Navigator whether the point is in the Northern or the Southern hemisphere. Use the button to change the hemisphere. Enter numbers for the latitude. Use the decimal point if the degrees, minutes or seconds are not integers. Use the / / button (the label depends on the current cursor position inside the latitude) to start entering minutes after degrees or seconds after minutes. When finished, tap the longitude on the right, and enter it as you did latitude. This time the hemisphere-changing button tells The NVX225 Navigator whether the point is located East or West from the meridian crossing Greenwich, UK. 83