Kenmore 4602 Use and Care Guide - Page 4

Adjusting the Controls To adjust the set points, press and hold the TEMP button for 3 seconds. When adjust mode is activated, set points and adjusting information will appear on the display screen. RECOMMENDED (dF) FREEZER rl°F u REFRIGERATOR(37"F) RECOMMEND_ --I _|°F ZJ I °°,t, oFoclv I v )^ ( .etoro NOTE: To view Celsius temperatures, press the UNITS button when adjust mode is activated. To return the display setting to Fahrenheit, press UNITS again. Refrigerator Controls When adjust mode is activated, the fourth and fifth buttons (from the left) adjust the refrigerator compartment temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). • Press the fourth button (down arrow) to lower the set point. • Press the fifth button (up arrow) to raise the set point. Freezer Controls When adjust mode is activated, the second and third buttons (from the left) adjust the freezer compartment temperature. The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C). • Press the second button (down arrow) to lower the set point. • Press the third button (up arrow) to raise the set point. CONDITION: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Setting 1o higher REFRIGERATOR too warm REFRIGERATOR Setting 1o lower FREEZER too cold FREEZER Setting 1o higher FREEZER too warm/too little ice FREEZER Setting 1o lower Press RETURN to exit adjust mode, or allow about 15 seconds of inactivity and adjust mode will turn off automatically. Additional Features Accelerated Ice Production The Accelerated Ice feature assists with temporary periods of heavy ice usage by increasing ice production. • Press the ACCELER ICE button to turn on the feature. The display screen indicates whether the feature is on or off. NOTE: If increased ice production is desired at all times, change the freezer control to a lower setting. Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. Temperature Display Always On This feature keeps the temperature display on at all times. • Press and hold TEMP and LOCK at the same time for 3 seconds to turn the feature on. IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time. • Press and hold TEMP and LOCK at the same time for 3 seconds again to turn the feature off. Door Ajar Alarm The Door Ajar Alarm feature sounds an alarm when the refrigerator or freezer door is open for 5 minutes and the product cooling is turned on. The alarm will repeat every 2 minutes. Close both doors to turn it off. The feature then resets and will reactivate when either door is left open again for 5 minutes. Disabling Sounds • To turn off all dispenser and control sounds, including the Door Ajar Alarm, press and hold ICE and TEMP at the same time for 3 seconds. IMPORTANT: To avoid unintentionally changing other settings, be sure to press both buttons at exactly the same time. • To turn all sounds back on, press and hold ICE and TEMP at the same time for 3 seconds again. The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid "spot" freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28 ° to 32°F (-2 ° to 0°C). The convertible drawer temperature control is preset to the PRODUCE setting. To Store Meat: Set the control to one of the three MEAT settings to store meat at its optimal storage temperature. To Store Vegetables: Set the control to PRODUCE to store vegetables at their optimal storage temperatures. NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments. Hum dty CostA} SOTS@F )0_;,@., _;: You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH. LOW (open) for best storage of fruits and vegetables with skins. HIGH (closed) for best storage of fresh, leafy vegetables. ON OFF The Accelerated Ice setting will remain on for a minimum of 90 minutes unless manually turned off. The display will continue to show your normal temperature set point.