Kenwood DDX574BH Instruction manual - Page 63
Setting the speakers-car type, speaker size and crossover frequency
View all Kenwood DDX574BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SETTINGS ❏ Setting the speakers-car type, speaker size and crossover frequency 1 Display the screen. On the Home screen: 2 Select a car type (1), select the location of the speakers (2), then display the screen (3). 3 Select the speaker type (1), select the size of the selected speaker (2), then display the
ENGLISH
63
SETTINGS
SETTINGS
❏
Setting the speakers—car type,
speaker size and crossover frequency
1
Display the
<Car Setting>
screen.
On the Home screen:
2
Select a car type (
1
), select the location
of the speakers (
2
)
, then display the
<Speaker Select>
screen (
3
).
3
Select the speaker type (
1
), select the size
of the selected speaker (
2
), then display
the
<X’over>
screen (
3
).
•
When a speaker is not connected, select
<None>
.
•
When setting the front speakers, also select
the speaker size for
<Tweeter>
.
4
Adjust the crossover frequency of the
selected speaker.
<TW Gain (L)>
/
<TW Gain (R)>
Adjusts the output volume of
the tweeter (left/right).*
1
*
2
<TW FREQ>
Adjusts the crossover
frequency for the tweeter.*
1
*
2
<Gain>
Adjusts the output volume of
the selected speaker.
<HPF FREQ>
Adjusts the crossover
frequency for the front or rear
speakers (high pass filter).*
3
<LPF FREQ>
Adjusts the crossover
frequency for the subwoofer
(low pass filter).*
4
<Slope>
Adjusts the crossover slope.*
5
<Phase>
Selects the phase for the
subwoofer.*
4
*
1
Appears only when the front speakers are selected.
*
2
Adjustable only when
<Tweeter>
is set to
<Small>
,
<Middle>
, or
<Large>
on the
<Speaker Select>
screen.
*
3
Appears only when the front or rear speakers are selected.
*
4
Appears only when the subwoofer is selected.
*
5
Not adjustable when
<HPF FREQ>
or
<LPF FREQ>
is set to
<Through>
.