Kenwood DDX574BH Instruction manual - Page 81
Connecting wires to terminals for DDX751WBTL for Toyota Cars
View all Kenwood DDX574BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX751WBTL (for Toyota Cars) See page 83. Connect the antenna cord to the antenna terminal. See page 84. *1 If no connections are made, do not let the cable come out from the tab. *2 When using Antenna Control, connect the ANT CONT lead (blue) to A5 (blue) on the wiring harness. 10 A fuse See page 83. See page 83. 1 Blue with white stripe (Power control wire) (12 V 200 mA) Brown (Mute control wire) *2 7 Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Light green (Parking sensor wire) Connect to the 3 vehicle's parking USB terminal (1.0 m): See page 82. brake detection switch FRONT VIEW CAMERA REAR VIEW CAMERA VIDEO OUT 9 *1 Connect to power control terminal when using the optional power amplifier. See page 83. See page 83. See page 83. Connector D % % % Pin harness. • For best safety, be sure to connect the parking sensor. Connect to the vehicle's steering remote harness. • Depending on the type of vehicle, it cannot be connected. Color and functions of Connector A, B, C and D A1 Orange/White Dimmer Not used. A2 Yellow Battery A4 Red Ignition (ACC) Connector A A5 Blue Antenna control (12 V 300 mA) Connect to the vehicle's harness. A6 Black A8/A7 White ª / White/Black · Ground connection Left speaker (front) Connector B A10/A9 Gray ª / Gray/Black · Right speaker (front) Connect to the vehicle's harness. B2/B1 Green ª / Green/Black · B6/B5 Purple ª / Purple/Black · Left speaker (rear) Right speaker (rear) Connector C Connect to the vehicle's harness. C5 Blue D21 White $ • Depending on the type of vehicle, it cannot be connected. In this case, connect the JASO D22 Red plug directly to the unit. D23 Black Antenna control Input 1 Input 2 Ground ENGLISH 81