KitchenAid KDRP407HSS Use and Care Guide - Page 12

Adjusting the height of top burner, flames, The screw is located in the center of

Get KitchenAid KDRP407HSS - 30inch Pro-Style Dual-Fuel Range PDF manuals and user guides View all KitchenAid KDRP407HSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Using and Caring for Your Cooktop Adjusting the height of top burner flames The LO burner flame should be a steady blue flame approximately 1⁄4 inch (6 mm) high. It can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob. To adjust the flame height follow the instructions below: 1. Turn the control knob to "LO." 2. Remove the control knob. (If there is not an adjustment screw underneath the knob the flame height is not adjustable.) 3. Hold the valve stem with a pair of pliers. The screw is located in the center of the valve stem. Use a small flat head screwdriver to turn the screw until the flame is the proper size. 4. Replace the control knob. 5. Test the flame by turning the control from "LO" to "HI," checking the flame at each setting. Low flame Port High flame Adjustment screw Valve stem Port 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
12
U
sing and
C
aring for
Y
our
C
ooktop
Adjusting the height of top burner
flames
The LO burner flame should be a steady
blue flame approximately
1
/
4
inch (6 mm)
high. It can be adjusted using the
adjustment screw in the center of the valve
stem. The valve stem is located directly
underneath the control knob.
To adjust the flame height follow the in-
structions below:
1. Turn
the control knob to “LO.”
2. Remove
the control knob. (If there is not
an adjustment screw underneath the
knob the flame height is not adjustable.)
3. Hold
the valve stem with a pair of pliers.
The screw is located in the center of the
valve stem. Use a small flat head screw-
driver to turn the screw until the flame is
the proper size.
4. Replace
the control knob.
5. Test
the flame by turning the control from
“LO” to “HI,” checking the flame at each
setting.
Adjustment screw
Valve stem
Low flame
High flame
Port
Port