KitchenAid KDRP407HSS Use and Care Guide - Page 6

The oven vent, Removing the oven, To replace - features

Get KitchenAid KDRP407HSS - 30inch Pro-Style Dual-Fuel Range PDF manuals and user guides View all KitchenAid KDRP407HSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Parts and Features The oven vent Hot air and moisture escape from the oven through vent. The vent is above the oven door. It is needed for air circulation. Do not block the vent. Poor baking/roasting can result. 3. Grasp under handle and gently close door as far as it will shut. Pull door out at bottom to remove. 4. Set door aside on protected surface. Oven vent Removing the oven door For normal use of your oven, you do not need to remove the door. However, you can remove the door by following the instructions in this section. The oven door is heavy. Use both hands to remove and replace the door. Do not lift and carry the door by the handle. To remove and replace the door you may need help. To replace: 1. Fit hinge arms into slots in frame. Push in at lower corners to insure that hinge arms are fully engaged. To remove: 1. Open door all the way. NOTE: Two 5⁄32" (4 mm) Allen wrenches or two nails of similar diameter may be used if factory furnished door removal pins have been misplaced. Be careful not to damage porcelain finish. 2. Insert small end of a door removal pin into each door hinge. 2. Open the door all the way. 3. Remove the door removal pins from each hole. 4. Close the door. NOTE: If the door does not operate freely, you have not installed it properly. Repeat Steps 1-4. Insert small end of pin here 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
3. Grasp
under handle and gently close
door as far as it will shut. Pull door out
at bottom to remove.
4. Set
door aside on protected surface.
To replace:
1. Fit
hinge arms into slots in frame. Push in
at lower corners to insure that hinge arms
are fully engaged.
2. Open
the door all the way.
3. Remove
the door removal pins from
each hole.
4. Close
the door.
NOTE:
If the door does not operate freely,
you have not installed it properly. Repeat
Steps 1-4.
6
The oven vent
Hot air and moisture escape from the oven
through vent. The vent is above the oven
door. It is needed for air circulation.
Do not
block the vent.
Poor baking/roasting can
result.
P
arts and Features
Removing the oven
door
For normal use of your oven, you do not
need to remove the door. However, you can
remove the door by following the instructions
in this section.
The oven door is heavy. Use both hands
to remove and replace the door. Do not lift
and carry the door by the handle. To remove
and replace the door you may need help.
To remove:
1. Open
door all the way.
NOTE:
Two
5
/
32
" (4 mm) Allen wrenches or
two nails of similar diameter may be used if
factory furnished door removal pins have
been misplaced. Be careful not to damage
porcelain finish.
2. Insert
small end of a door removal pin
into each door hinge.
Oven vent
Insert small end of
pin here