Konica Minolta HP PageWide XL 4500 MFP User Guide - Page 142

Move or store the folder, Clean the scanner’s glass plate

Page 142 highlights

NOTE: If the printer or ink cartridges are moved from a cold location to a warm and humid location, water from the atmosphere can condense on the printer parts and cartridges and can result in ink leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on the printer or installing the ink cartridges, to allow the water to evaporate. Move or store the folder Move the folder on its own wheels only over smooth, flat surfaces and do not attempt to go up or down steps. Disconnect the cable before moving or storing the folder. Before using the folder again, adjust its height and reconnect the cable. Clean the scanner's glass plate You are recommended to clean the scanner's glass plate periodically, depending on how often you use the scanner. 1. Turn off the printer using the Power key at the front, then also turn off the power switch at the rear and disconnect the power cable. 2. There is a small lever at the rear left of the scanner. Slide the lever up and open the scanner cover. WARNING! Do not lift the scanner while the scanner cover is open. Your fingers or hand may be trapped or crushed. 136 Chapter 10 Maintenance ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170

NOTE:
If the printer or ink cartridges are moved from a cold location to a warm and humid location, water
from the atmosphere can condense on the printer parts and cartridges and can result in ink leaks and printer
errors. In this case, HP recommends that you wait at least 3 hours before turning on the printer or installing
the ink cartridges, to allow the water to evaporate.
Move or store the folder
Move the folder on its own wheels only over smooth,
flat
surfaces and do not attempt to go up or down steps.
Disconnect the cable before moving or storing the folder.
Before using the folder again, adjust its height and reconnect the cable.
Clean the scanner’s glass plate
You are recommended to clean the scanner's glass plate periodically, depending on how often you use the
scanner.
1.
Turn
off
the printer using the
Power
key at the front, then also turn
off
the power switch at the rear and
disconnect the power cable.
2.
There is a small lever at the rear left of the scanner. Slide the lever up and open the scanner cover.
WARNING!
Do not lift the scanner while the scanner cover is open. Your
fingers
or hand may be
trapped or crushed.
136
Chapter 10
Maintenance
ENWW