Konica Minolta KIP 75 Series KIP 75 Series Hardware User Manual - Page 32
Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding.
View all Konica Minolta KIP 75 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7. Lift the roll media by holding both Flanges. Lower Flanges onto Slide Guides (5) in Roll Deck. 5 5 NOTE (1) Be careful of the winding direction of the roll media. Rear: Deck back OK NG Rear: Deck back Front: to media path Front: to media path Correct: Edge comes from bottom Wrong: Edge comes from top (2) The outside rim (6) of Flange should meet the black triangle (7) marked on Slide Guide. Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding. 7 7 6 6 Correct Wrong 2-8 Chapter 2 Basic Operation
Chapter 2
Basic Operation
2-8
7. Lift the roll media by holding both Flanges. Lower Flanges onto Slide Guides (5) in Roll Deck.
NOTE
(1) Be careful of the winding direction of the roll media.
Correct
: Edge comes from bottom
Wrong
: Edge comes from top
(2) The outside rim (6) of Flange should meet the black triangle (7) marked on Slide Guide.
Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding.
Correct
Wrong
5
5
6
7
Front: to media path
Rear: Deck back
Rear: Deck back
Front: to media path
OK
NG
6
7