Konica Minolta Kodak i5850 User Guide - Page 21
Turning the scanner on, Equipment Service Agreement. Kodak Professional Services provide
![]() |
View all Konica Minolta Kodak i5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Turning the scanner on 1. Press the main power switch on the back of the scanner to the On (I) position. The LED on the front of the scanner will be a steady yellow and nothing will be displayed on the Operator Control Panel (this is low power mode). NOTE: If there is paper in the input elevator, the scanner will automatically go to the Ready mode. i5200/i5600 i5200V/i5600V Scanners i5800/i5850 Scanners A-61670 August 2014 NOTES: • It is not necessary to turn the main power switch off unless you are not going to use the scanner for a prolonged period of time, you are performing maintenance, you are going to move the scanner or are directed to turn the power off by Technical Support. • For the Kodak i5800/i5850 Scanner only: There are four leveling feet on the bottom of the scanner. If you need to move the scanner, these leveling feet must be raised. Contact Technical Support before attempting to relocate the scanner. • Damages incurred when moving a scanner will not be covered by the Equipment Service Agreement. Kodak Professional Services provide relocation services. Go to www.kodakalaris.com/go/dicontacts for more information. 2-5
![](/manual_guide/products/konica-minolta-kodak-i5850-user-guide-1d77f01/21.png)