Konica Minolta Kodak i5850 User Guide - Page 89

Replacing the separation roller or separation roller tires, to replace the separation roller tires

Get Konica Minolta Kodak i5850 PDF manuals and user guides View all Konica Minolta Kodak i5850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

Replacing the separation roller or separation roller tires 1. Open the scanner cover. 2. Pull the separation roller cover forward and remove the separation roller. NOTE: The separation roller cover is spring-loaded. Hold the separation roller cover back until you remove the separation roller, then gently lower the separation roller cover back in place. If you want to replace the separation module, do Steps 3 and 4. If you want to replace the separation roller tires, go to Step 5. 3. Insert the new separation roller. Be sure to line up the slots on the separation roller with the holders. 4. Gently release the separation roller cover back in place and close the scanner cover. 7-12 A-61670 August 2014

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
7-12
A-61670 August
2014
Replacing the separation
roller or separation roller
tires
1.
Open the scanner cover.
2.
Pull the separation roller cover forward and remove the separation roller.
NOTE:
The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the separation roller cover back in place.
If you want to replace the separation module, do Steps 3 and 4. If you want
to replace the separation roller tires, go to Step 5.
3.
Insert the new separation roller. Be sure to line up the slots on the
separation roller with the holders.
4.
Gently release the separation roller cover back in place and close the
scanner cover.