Konica Minolta Kodak i5850 User Guide - Page 38

Using the Operator Control Panel touchscreen Idle screen There are a variety of functions that can be accessed by using the Operator Control Panel touchscreen. If there is an arrow after the function, another screen will be displayed allowing you to make additional choices. For more information and procedures for using these functions, see the following sections. To navigate through the touchscreen, simply touch the desired function with your finger. Using any object other than your finger may damage the touchscreen and void your warranty. NOTE: If all of the functions cannot be displayed on the touchscreen at one time, touch the up or down arrow at the right-edge of the screen to gain access to a desired function. The Idle screen provides a list of functions, scroll bar and the Settings button. In addition, the counter value is displayed in the status area at the top of the screen. Counter value the counter value will start at 0 and be incremented with each page scanned. The maximum value that will be displayed is 999,999,999. NOTE: If the User Counter option is On, then the counter value is followed by the Document counter icon or the User counter icon to indicate which counter value is being displayed: Document counter indicates that the Document counter is being icon displayed. User counter icon indicates that the User counter is being displayed. Batch For the i5850 Scanner only: indicates that batching is enabled. When the Idle screen is displayed, you can do the following: • Lower Elevator - lowers the input elevator to the lowest position. NOTE: This option will not be available if Auto Raise is off. • Operator Log - provides error code information, such as the time the error occurred, the error code and a brief description of the error. • Information - provides scanner information, such as scanner model, firmware version, etc. A-61670 August 2014 3-15