Konica Minolta Kodak i5850 User Guide - Page 75
Bar pattern details, Patch Codes
View all Konica Minolta Kodak i5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Bar pattern details Patch Codes Patch 2 Assigns image level 2 to the current document. A patch is a pattern of parallel, alternating black bars and spaces that is printed on a document. In order to prevent other document data from being detected as a patch, the scanner will only recognize a correctly formed bar pattern as a patch. The width of bars and spaces between the bars need to be very tightly controlled to ensure that the scanner detects the bar pattern. The wide bars should be 0.20 inches (5 mm) wide + 0.01 inches (0.25 mm). The narrow bars and spaces should be 0.08 inches (2.03 mm) wide + 0.01 inches (0.25 mm). The maximum width of the patch code is 0.80 inches (20 mm) + 0.01 inches (0.25 mm). The minimum overall length of the patch bars is 2 inches (50 mm). Patch code specifications Patch 2 Zone Inches Millimeters Low High Low High Range Range Range Range A 0.19 0.21 4.83 5.33 B 0.27 0.29 6.86 7.37 C 0.35 0.37 8.89 9.40 D 0.43 0.45 10.92 11.43 E 0.51 0.53 12.95 13.46 F 0.59 0.61 14.99 15.49 G 0.79 0.81 20.01 20.57 Patch 3 Patch 3 Assigns image level 3 to the current document. Patch T / Transfer Patch Patch T / Transfer Patch Zone Inches Millimeters Low High Low High Range Range Range Range A 0.19 0.21 4.83 5.33 B 0.27 0.29 6.86 7.37 C 0.35 0.37 8.89 9.40 D 0.43 0.45 10.92 11.43 E 0.63 0.65 16.00 16.51 F 0.71 0.73 18.03 18.54 G 0.79 0.81 20.07 20.57 Zone Inches Millimeters Low High Low High Range Range Range Range A 0.07 0.09 4.83 5.33 B 0.15 0.17 6.86 7.37 C 0.35 0.37 8.89 9.40 D 0.43 0.45 10.92 11.43 E 0.51 0.53 16.00 16.51 F 0.59 0.61 18.03 18.54 G 0.79 0.81 20.07 20.57 6-10 A-61670 August 2014