Konica Minolta Kodak i5850 User Guide - Page 82

Cleaning the separation roller tires, A-61670 August 2014

Get Konica Minolta Kodak i5850 PDF manuals and user guides View all Konica Minolta Kodak i5850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Cleaning the separation roller tires 4. Pull the separation roller cover forward and remove the separation roller. NOTE: The separation roller cover is spring-loaded. Hold the separation roller cover back until you remove the separation roller, then gently lower the separation roller cover back in place. 5. Manually rotate and wipe the separation roller tires with a roller cleaning pad. For best results wipe parallel to the ribs in order to remove any residue between the ribs. 6. Inspect the tires. If the tires show signs of wear or damage, replace the tires. See "Replacement procedures" later in this chapter. 7. Reinstall the separation roller by aligning the slots on the separation roller with the holders. A-61670 August 2014 7-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
A-61670 August 2014
7-5
Cleaning the separation
roller tires
4.
Pull the separation roller cover forward and remove the separation roller.
NOTE:
The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the separation roller cover back in place.
5.
Manually rotate and wipe the separation roller tires with a roller cleaning
pad. For best results wipe parallel to the ribs in order to remove any
residue between the ribs.
6.
Inspect the tires. If the tires show signs of wear or damage, replace the
tires. See “Replacement procedures” later in this chapter.
7.
Reinstall the separation roller by aligning the slots on the separation roller
with the holders.