Konica Minolta Kodak i5850 User Guide - Page 91
Replacing the imaging guides, Using the screwdriver provided with the scanner, loosen the screws
View all Konica Minolta Kodak i5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the imaging guides The imaging guides should be replaced when they are heavily scratched and defects show in the image. NOTE: Handle the imaging guides carefully so as to not put fingerprints on the guides. 1. Open the scanner cover. 2. Using the screwdriver provided with the scanner, loosen the screws on each end of the lower imaging guide and remove it from its position. 3. Install the new imaging guide and tighten the screws to secure the imaging guide. 4. Repeat Steps 2 and 3 to replace the upper imaging guide. 5. Close the scanner cover. 7-14 A-61670 August 2014
7-14
A-61670 August
2014
Replacing the imaging
guides
The imaging guides should be replaced when they are heavily scratched and
defects show in the image.
NOTE:
Handle the imaging guides carefully so as to not put fingerprints on the
guides.
1.
Open the scanner cover.
2.
Using the screwdriver provided with the scanner, loosen the screws on
each end of the lower imaging guide and remove it from its position.
3.
Install the new imaging guide and tighten the screws to secure the imaging
guide.
4.
Repeat Steps 2 and 3 to replace the upper imaging guide.
5.
Close the scanner cover.