Konica Minolta Kodak i5850 User Guide - Page 31

Scanning documents The scanner must be enabled to scan documents. This is done through the scanning application. After enabling the scanner, depending on how your scanner is configured, your scanner will either automatically start scanning (i.e., auto start), or will start scanning when you touch the Start/Resume button on the scanner. For more information, see the documentation that supports your scanning application. 1. After you prepare your documents according to the guidelines in the previous section, be sure your scan job is set up in your scanning application as desired. 2. Place the documents you want to scan in the input elevator. 3. Start scanning via your scanning application. Depending on how your scanner is configured, the touchscreen will display either the Scanning screen or the Paused screen. Auto start options: TWAIN: Automatically start scanning ISIS: Automatically start transport VRS: ADF (Auto start enabled) / Panel Feed (Auto start disabled) See the Scanning Setup Guides for TWAIN, ISIS and VRS for more information. This screen will be displayed if the auto start option is enabled in your scanning application: This screen will be displayed if the auto start option is disabled in your scanning application: This screen will be displayed if the This screen will be displayed if the indexing (i5850 Scanner only) and indexing (i5850 Scanner only) and auto start options are enabled in your auto start options are disabled in scanning application: your scanning application: 3-8 A-61670 August 2014