Konica Minolta bizhub 5000i bizhub 5000i/4000i User Guide - Page 200
Error Message, Cause, Action, Cancel, No Tray T3
View all Konica Minolta bizhub 5000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Error Message No Paper MP No Paper T1 No Paper T2 No Paper T3 No Paper T4 No Toner No Tray T1 No Tray T2 No Tray T3 No Tray T4 Out of Memory Print Data Full Print Unable ## Replace Drum Replace Toner Self-Diagnostic Size Error Cause Action The MP tray is out of paper, or Do one of the following: paper is not loaded correctly in the • Refill paper in the MP tray. Make sure the MP tray. paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. The machine failed to feed paper from the indicated paper tray. Do one of the following: • Refill paper in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. The toner cartridge or the toner cartridge and imaging unit assembly is not installed correctly. Remove the toner cartridge and imaging unit assembly. Remove the toner cartridge from the imaging unit, and reinstall the toner cartridge back in the imaging unit. Reinstall the toner cartridge and imaging unit assembly back in the machine. If the problem continues, replace the toner cartridge with a new one. The paper tray is not installed or Reinstall the paper tray indicated on the LCD. not installed correctly. The machine's memory is full. Press Cancel and reduce the print resolution. The machine's memory is full. Press Cancel and delete the previously stored secure print data. The machine has a mechanical problem. • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact customer support. It is time to replace the imaging unit. Replace the imaging unit with a new one. See Related Information: Replace the Imaging Unit. The imaging unit counter was not reset when a new drum was installed. Reset the imaging unit counter. See the instructions included with the new imaging unit. The toner cartridge is at the end of Replace the toner cartridge with a new one. its life. The machine stops all print operations. The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. 196