Konica Minolta bizhub 5000i bizhub 5000i/4000i User Guide - Page 70
Con Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
View all Konica Minolta bizhub 5000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode. >> bizhub 4000i >> bizhub 5000i bizhub 4000i 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the [WLAN] option, and then press OK. 3. Press a or b to select the [Setup Wizard] option, and then press OK. 4. When [WLAN Enable?] appears, press a to select On. This will start the wireless setup wizard. To cancel, press Cancel. 5. The machine will search for your network and display a list of available SSIDs. Press a or b to select the [] option, and then press OK. 6. Enter the SSID name, and then press OK. 7. Press a or b to select the [Ad-hoc] option, and then press OK. 8. Press a or b to select the Encryption Type [None] or [WEP], and then press OK. 9. If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK. Your machine supports the use of the first WEP key only. 10. To apply the settings, press a. To cancel, press b. 11. The machine will attempt to connect to the wireless device you have selected. If your wireless device is connected successfully, the machine's LCD displays [Connected]. bizhub 5000i 1. Press [Settings] > [Network] > [WLAN] > [Setup Wizard]. 2. When [Switch network interface to wireless?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 3. The machine will search for your network and display a list of available SSIDs. Press a or b to display the [] option. 4. Press []. 5. Enter the SSID name, and then press [OK]. 6. Press [Ad-hoc]. 7. Press either [None] or [WEP] to select Encryption Type. 8. If you selected [WEP] for Encryption Type, enter the WEP key, and then press [OK]. • Your machine supports the use of the first WEP key only. 9. To apply the settings, press [Yes]. To cancel, press [No]. 10. The machine will attempt to connect to the wireless device you have selected. If your wireless device is connected successfully, the machine's LCD displays [Connected]. 66