Konica Minolta bizhub 5000i bizhub 5000i/4000i User Guide - Page 77

Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast >> bizhub 4000i >> bizhub 5000i bizhub 4000i Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1. Check and record the current wireless network settings. Network Name (SSID) Communication Mode Infrastructure For example: Network Name (SSID) HELLO Communication Mode Infrastructure Authentication Method Open System Shared Key WPA/WPA2-PSK Encryption Mode NONE WEP WEP AES TKIP (TKIP is supported for WPA-PSK only.) Authentication Method WPA2-PSK Encryption Mode AES Network Key - Network Key 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your machine supports the use of the first WEP key only. 2. Press a or b to select the [Network] option, and then press OK. 3. Press a or b to select the [WLAN] option, and then press OK. 4. Press a or b to select the [Setup Wizard] option, and then press OK. 5. When [WLAN Enable?] appears, press a to select On. This will start the wireless setup wizard. To cancel, press Cancel. 6. The machine will search for your network and display a list of available SSIDs. Press a or b to select the [] option, and then press OK. 7. Enter the SSID name, and then press OK. 8. Press a or b to select the [Infrastructure] option, and then press OK. 9. Press a or b to select the Authentication Method you want, and then press OK. 10. Do one of the following: • If you selected the [Open System] option, press a or b to select the Encryption Type [None] or [WEP], and then press OK. If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK. 73