Konica Minolta bizhub C25 bizhub C25 Facsimile User Guide - Page 39
Specifying Settings in UTILITY Menu, General Procedure for Specifying Settings in UTILITY Menu,
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Specifying Settings in UTILITY Menu General Procedure for Specifying Settings in UTILITY Menu 1 Press the + or , key to select [UTILITY], and then press the Select key. 2 Press the + or , key to select the desired menu, and then press the Select key to display the selected menu. d Refer to the menu configuration on page 2-9 to display the desired menu. 3 To select a setting, press the +, ,, * or ) key. To enter a setting, use the keypad to type in the number. 4 Press the Select key. The setting is applied. d To cancel the settings, press the Back key. Memory Reception Received faxes can be stored in the memory and printed at a specified time. This is convenient, for example, when confidential documents are received. Memory reception can be used with the following settings. - Start/end time settings: Not set [MEMORY RX MODE] function is normally set to [ON]. To print a fax saved in memory, set [MEMORY RX MODE] function to [OFF]. - Start/end time settings: Set Memory reception mode begins and ends at the specified time. Example 1: When [ON TIME] setting is set to 18:00 and [OFF TIME] setting is set to 8:00 The machine is in memory reception mode from 18:00 to 8:00 and in normal reception mode, where faxes are printed after being received, from 8:00 to 18:00. Example 2: When [ON TIME] setting is set to 12:00 and [OFF TIME] setting is set to 12:00 (the start time and end time are the same) [MEMORY RX MODE] function is normally set to [ON]; however, faxes saved in memory are printed at 12:00. 2-28 Specifying Settings in UTILITY Menu