Konica Minolta bizhub C25 bizhub C25 Facsimile User Guide - Page 57

Sending a Fax to Multiple Recipients (Group Dial), Addressbook, Select, Start

Page 57 highlights

Sending a Fax to Multiple Recipients (Group Dial) Multiple destinations can be selected with a group dial destination. d Multiple destinations must have been previously registered with a group dial destination. For details, refer to "Registering a Group Dial Destination" on page 6-8. 1 Press the Addressbook key three times. d The Addressbook key can be used if the main screen or [Can Use AddressBook] is displayed. 2 Use the keypad to type in the group dial number(1-20), and then press the Select key. d If a number was incorrectly entered, press the Back key, and then type in the correct number of the group dial destination. d If the entered group dial number is not registered with a fax num- ber, the message [NOT FAX NO.] appears. In addition, if the entered group dial number is not registered with a recipient, the message [NOT REGISTERED!] appears. Enter a group dial number registered with a fax number. 3 When [OK=Select] appears, press the Select key again. 4 Press the + or , key to select [FINISH], and then press the Select key. d To erase the selected destinations, press the Stop/Reset key. 5 Press the Start key. The document is scanned, and then the fax is sent. d To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to cancel the setting. Select [YES], and then press the Select key. If this is done, all selected recipients are cleared. d If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/ [FULL FUNC. NO.] has been restricted, type in the number specified for [FULL FUNC. NO.] after pressing the Start key. 3-16 Specifying Multiple Recipients

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121

Specifying Multiple Recipients
3-16
Sending a Fax to Multiple Recipients (Group Dial)
Multiple destinations can be selected with a group dial destination.
d
Multiple destinations must have been previously registered with a
group dial destination. For details, refer to “Registering a Group Dial
Destination” on page 6-8.
1
Press the
Addressbook
key three times.
d
The
Addressbook
key can be used if the main screen or [Can Use
AddressBook] is displayed.
2
Use the keypad to type in the group dial number(1-20), and then press
the
Select
key.
d
If a number was incorrectly entered, press the
Back
key
, and then
type in the correct number of the group dial destination.
d
If the entered group dial number is not registered with a fax num-
ber, the message [NOT FAX NO.] appears. In addition, if the
entered group dial number is not registered with a recipient, the
message [NOT REGISTERED!] appears. Enter a group dial num-
ber registered with a fax number.
3
When [OK=Select] appears, press the
Select
key again.
4
Press the
+
or
,
key to select [FINISH], and then press the
Select
key.
d
To erase the selected destinations, press the
Stop/Reset
key.
5
Press the
Start
key.
The document is scanned, and then the fax is sent.
d
To stop the transmission, press the
Stop/Reset
key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the
Select
key. If this is done, all selected
recipients are cleared.
d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the
Start
key.