Konica Minolta bizhub C25 bizhub C25 Facsimile User Guide - Page 64
Sending a Fax Manually Using the On Hook Key
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Sending a Fax Manually Using the On Hook Key 1 Load the document into the ADF. d When sending a fax manually, load the document into the ADF. An error will occur if the document is placed on the original glass. d For details on loading the document into the ADF, refer to "Send- ing a Fax Using the ADF" on page 3-2. 2 If desired, select the image quality. d For details, refer to "Selecting the Image Quality" on page 3-7. 3 Press the On hook key. 4 Specify the fax number of the recipient. d The keys for registered destinations can be used even if the On hook key has been pressed. For details, refer to "Specifying a Recipient" on page 3-9. (Group dial destinations cannot be speci- fied.) d If Pulse is selected as the telephone line type, press the temporarily change the line type to Tone. 5 Press the Start key to begin scanning and sending the fax. key to d To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to cancel the setting. Select [YES], and then press the Select key. d If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/ [FULL FUNC. NO.] has been restricted, type in the number speci- fied for [FULL FUNC. NO.] after pressing the Start key. Sending a Fax Manually 3-23