Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub C287 » Manual Viewer

Konica Minolta bizhub C287 bizhub C287/C227 Security Operations User Manual - Page 28

Accessing the Administrator Mode, Web Connection, main power switch, Click [Logout].

View all Konica Minolta bizhub C287 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

2.1 Accessing the Administrator Mode 2 % If "Administrator (Admin Mode)" is selected, the settings for the machine system and network can be registered or changed. % When accessing the Admin Mode using the Web Connection, enter the same Administrator Password as that for the machine. 6 Click [OK]. % If a wrong Administrator Password is entered, a message that tells that the authentication has failed appears. Enter the correct Administrator Password. % If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong Administrator Password is entered a predetermined number of times (once to three times) or more set by the administrator, a message appears saying that the machine accepts no more Administrator Passwords because of unauthorized access for any subsequent entry of the Administrator Password. The machine is then set into an access lock state. To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. 7 Click [Logout]. 8 Click [OK]. This allows you to log off from the Admin Mode. bizhub C287/C227 2-6

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
Administrators	6
Compliance with the ISO15408 Standard	6
Operating Precautions	6
INSTALLATION CHECKLIST	8
1.2 Security Functions	11
Check Count Clear Conditions	11
1.3 Precautions for Operation Control	13
Roles of the Owner of the Machine	13
Roles and Requirements of the Administrator of the machine	13
Password Usage Requirements	13
External authentication server control requirements	14
Security function operation setting operating requirements	14
Operation and control of the machine	14
Machine Maintenance Control	16
Precautions for using the printer driver	16
1.4 Miscellaneous	17
Password Rules	17
Precautions for Use of Various Types of Applications	17
Encrypting communications	18
Print functions	18
IPP printing	18
Items of Data Cleared by Overwrite All Data Function	19
Fax functions	20
USB keyboard	20
Different types of boxes	20
Hardware and software used in the machine	20
Firmware integrity verification function	21
IPsec setting	21
CS Remote Care function	21
Terminating a Session and Logging out	21
Authentication error during external server authentication	22
2 Administrator Operations	24
2.1 Accessing the Administrator Mode	24
2.1.1 Accessing the Administrator Mode	24
2.1.2 Accessing the User Mode	30
2.2 Enhancing the Security Function	34
2.2.1 Items cleared by HDD Format	36
2.2.2 Setting the Password Rules	37
2.2.3 Setting the Enhanced Security Mode	39
2.3 Preventing Unauthorized Access	42
Setting Prohibited Functions When Authentication Error	42
2.4 Canceling the Operation Prohibited State	44
Performing Release Setting	44
2.5 Setting the Authentication Method	46
2.5.1 Setting the Authentication Method	46
2.5.2 Setting the External Server	49
2.6 ID & Print Setting Function	52
Setting ID & Print	52
2.7 System Auto Reset Function	54
Setting the System Auto Reset function	54
2.8 User Setting Function	56
Making user setting	57
2.9 Account Track Setting Function	62
Making account setting	62
2.10 User Box Function	67
2.10.1 Setting the User Box	67
2.10.2 Changing the user/account attributes and box password	72
2.10.3 Setting Memory RX	77
2.11 Changing the Administrator Password	80
Changing the Administrator Password	80
2.12 Protecting Data in the HDD	83
2.12.1 Setting the Encryption Key (encryption word)	83
2.12.2 Changing the Encryption Key	87
2.12.3 Setting the Overwrite HDD Data	89
2.13 Overwrite All Data Function	91
Setting the Overwrite All Data function	91
2.14 Obtaining Job Log	94
2.14.1 Obtaining and deleting a Job Log	94
2.14.2 Downloading the Job Log data	96
Job Log data	98
2.15 Setting time/date in machine	105
2.15.1 Setting time/date	105
2.15.2 Setting daylight saving time	108
2.16 SSL Setting Function	110
2.16.1 Device Certificate Setting	110
2.16.2 SSL Setting	112
2.16.3 Removing a Certificate	113
2.17 TCP/IP Setting Function	114
2.17.1 Setting the IP Address	114
2.17.2 Registering the DNS Server	115
2.18 AppleTalk Setting Function	116
Making the AppleTalk Setting	116
2.19 E-Mail Setting Function	117
Setting the SMTP Server (E-Mail Server)	117
3 User Operations	119
3.1 User Authentication Function	119
3.1.1 Performing user authentication	119
3.1.2 Accessing the ID & Print Document	123
3.2 Change Password Function	125
Performing Change Password	125
3.3 Secure Print Function	128
Accessing the Secure Print Document	128
3.4 User Box Function	131
3.4.1 Setting the User Box	131
3.4.2 Changing the user/account attributes and box password	136
3.4.3 Accessing the User Box and User Box file	142
4 Application Software	147
4.1 Data Administrator	147
4.1.1 Accessing from Data Administrator	147
4.1.2 Setting the user authentication method	150
4.1.3 Changing the authentication mode	151
4.1.4 Making the user settings	153
4.1.5 Making the account settings	154
4.1.6 DNS Server Setting Function	155
4.1.7 AppleTalk Setting Function	156

Match case Limit results 1 per page

bizhub C287/C227

2-6

2.1

Accessing the Administrator Mode

If "Administrator (Admin Mode)" is selected, the settings for the machine system and network can

be registered or changed.

When accessing the Admin Mode using the

Web Connection

, enter the same Administrator Pass-

word as that for the machine.

Click [OK].

If a wrong Administrator Password is entered, a message that tells that the authentication has failed

appears. Enter the correct Administrator Password.

If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized

access. If a wrong Administrator Password is entered a predetermined number of times (once to

three times) or more set by the administrator, a message appears saying that the machine accepts

no more Administrator Passwords because of unauthorized access for any subsequent entry of the

Administrator Password. The machine is then set into an access lock state.

To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and

then turn on, the

main power switch

of the machine. If the

main power switch

is turned off and

on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When

the

main power switch

is turned off, then on again, wait at least 10 seconds to turn it on after turn-

ing it off. If there is no wait period between turning the

main power switch

off, then on again, the

machine may not function properly.

Click [Logout].

Click [OK].

This allows you to log off from the Admin Mode.