Konica Minolta bizhub C287 bizhub C287/C227 Security Operations User Manual - Page 31
is turned off, then on again, wait at least 10 seconds to turn it on after turn,
View all Konica Minolta bizhub C287 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.1 Accessing the Administrator Mode 2 4 Press the Access key or touch [Login]. % If a wrong Administrator Password is entered, a message that tells that the authentication has failed appears. Enter the correct Administrator Password. % If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong Administrator Password is entered a predetermined number of times (once to three times) or more set by the administrator, a message appears saying that the machine accepts no more Administrator Passwords because of unauthorized access for any subsequent entry of the Administrator Password. The machine is then set into an access lock state. To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. 5 Perform a desired operation. % To delete a job, touch [Job List] and select a target job, and then touch [Delete]. 6 Press the Access key or touch [Close] to log off from the User Mode. bizhub C287/C227 2-9