Kyocera TASKalfa 4012i 3212i/4012i Operation Guide - Page 313

Using Various Functions > Functions Form Overlay Copy Layout/Edit Custom Box Functions Prints the original document overlaid with a form or image. Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already registered in the Job Box. Place the original for the form on top of the other originals. When using the optional document processor, the first page of the originals should be placed on the top. Form Original Density: 30% Copy Density: 100% Item Off Select Stored Form Density Value 10% to 100% Finishing Image Select Form*1 Transparent Form on Original Image Original Image on Form ― Scan New Form*2 Density 10% to 100% Finishing Image Transparent Form on Original Image Original Image on Form *1 Form must be previously registered in Job Box. Form for Form Overlay (page 5-62) *2 Not displayed when printing from the custom box. Description Specify the density of the form to be overlaid. Select [+] or [-] in "Density". The form is overlaid on the document. The form is placed on top of the document. The form is placed under the document. Select the form to be overlaid from Job Box. Select [Select Form] to display the job boxes that store documents which can be used as a form. Select the desired form from the list and select [OK]. Specify the density of the form to be overlaid. Select [+] or [-] in "Density". The form is overlaid on the document. The form is placed on top of the document. The form is placed under the document. 6-48