Kyocera TASKalfa 4012i 3212i/4012i Operation Guide - Page 426

Setup and Registration (System Menu) > System Menu Item Description Sleep Level (models except for Europe) Select the sleep level. Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode. Value: Quick Recovery, Energy Saver NOTE This function will not be displayed when the optional Network Interface Kit or Fiery controller is installed. Sleep Rules Select whether to use the Energy Saver mode for the following functions individually: • ID Card Reader*2 • Application Value: Off, On NOTE When the machine has entered sleep mode with Energy Saver setting, the ID card cannot be recognized. EnergySaver RecoveryLevel Select the method of recovery from energy saver. Value: Full Recovery: This mode enables the use of all functions immediately. However, this mode saves less energy. Normal Recovery: In this mode, you can select the method from the following: enabling the use of all functions immediately or enabling the use of desired functions only. If you want to use all functions immediately, select the [Energy Saver] key to execute recovery. Power Saving Recovery: This mode enables the use of desired functions only. This mode saves energy most effectively. Weekly Timer Settings Configure settings for switching the machine to OFF and waking it automatically at a specified time for each day of the week. Weekly Timer Select whether to use Weekly Timer. Value: Off, On Schedule Specify the time for each day of the week at which the machine turns OFF. Retry Times Set the number of retries for turning OFF this machine. Value: Limited Retries, Unlimited Retries NOTE If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10. Retry is not performed when "0" is set. If [Unlimited Retries] is selected, retry is performed until the machine turns OFF. Retry Interval Set the retry interval. Use [-] / [+] to enter a number. Value: 10 to 60 seconds (increments of 10 seconds) 8-70