Kyocera TASKalfa 4012i 3212i/4012i Operation Guide - Page 500
Command, Center RX, Guide, Wired, Wi-Fi
View all Kyocera TASKalfa 4012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 500 highlights
Troubleshooting > Troubleshooting Symptom 2 or more sheets are ― overlaps when ejected. (multi feed) Checkpoints Corrective Actions Load the paper correctly. Reference Page page 3-2 Printouts are wrinkled. Is the paper loaded correctly? ― Printouts are curled. Is the paper damp? ― Is the paper damp? Load the paper correctly. page 3-4 Turn the orientation 180 degrees around in which the paper is positioned. page 3-4 Replace the paper with new paper. page 3-4 Turn the paper over in the cassette, or turn the orientation 180 degrees around in which the paper is positioned. page 3-4 Replace the paper with new paper. page 3-4 Printer driver cannot be installed. Cannot print. Is the driver installed with the host name while Wi-Fi or Wi-Fi Direct function is available? Is the machine plugged in? Is the machine powered on? Are the printer cable and network cable connected? Is the print job paused? When the wired or Wi-Fi network is configured using the name resolution, does the IP address (private address) of the other network which can not access coexists? Specify the IP address instead of the host name. Plug the power cord into an AC outlet. Turn on the main power switch. Connect the correct printer cable and network cable securely. Resume printing. The number of host name and domain name which can be used with the machine is one respectively. Configure the network under this restriction. Change the settings of name resolution such as NetBEUI and DNS, or network environment settings. Select Wi-Fi, Wired Network or Optional Network as an unlimiteduse network on Primary Network (Client). Set to [Wired] or [Wi-Fi] either one of [On], and set the other setting to [Off]. page 2-46 ― page 2-2 page 2-7 page 7-11 ― Command Center RX User Guide page 8-61 page 8-53 10-17