Kyocera TASKalfa 4012i 3212i/4012i Operation Guide - Page 413

Setup and Registration (System Menu) > System Menu Item Description VNC (RFB) This is set when starting up a VNC Viewer (E.g. RealVNC) to use the Remote Operation.*1 The default port number is 9062. Value: Off, On Wi-Fi Direct Wi-Fi Set whether to enable this function for each network. Value: Disable, Enable Wired Network VNC (RFB) over SSL This is set when starting up a VNC Viewer (E.g. RealVNC) to use Remote Operation protected by SSL.*1, *2 The default port number is 9063. Value: Off, On NOTE When selecting [On], it also requires a certificate for SSL. The default certificate is the self-certificate of the machine. Wi-Fi Direct Wi-Fi Set whether to enable this function for each network. Value: Disable, Enable Wired Network Enhanced VNC over SSL This is set when starting up Command Center RX to use Remote Operation protected by SSL.*1, *2 The default port number is 9061. Value: Off, On NOTE • The default setting is [On]. • When selecting [On], it also requires a certificate for SSL. The default certificate is the self-certificate of the machine. Wi-Fi Direct Wi-Fi Set whether to enable this function for each network. Value: Disable, Enable Wired Network *1 The setting will be changed after restarting the device or network. *2 Set "SSL" to [On] in Security Settings. Security Settings (page 8-57) IMPORTANT Depending on the protocol, there are models where you need to restart the network or turn the machine OFF and then ON after changing the setting. Security Settings [System Menu/Counter] key > [System/Network] > [Network] > [Security Settings] Item SSL Description Select whether to use SSL for communication. Value: Off, On 8-57